“I am an old man now, and when I die and go to Heaven there are two matters on which I hope for enlightenment. One is quantum electrodynamics and the other is the turbulent motion of fluids. And about the former I am rather more optimistic…” – Sir Horace Lamb

The above quote by Sir Horace Lamb envision the apparent frustration from the “order in chaos” found in turbulence and emanating from the Navier-Stokes equations. Although seemingly a fairly simple set of equations, analytic solutions to even the most simple turbulent flows is out of reach, and one must suffice in obtaining a solution for the flow variables only by numerical confrontation with the equations.

The computational effort in Direct Numerical Simulation (DNS) of the Navier-Stokes equations rises as Re in the power of 9/4 rendering DNS so unacceptable and it shall probably remain so in the foreseeable future for most engineering applications, its use confined to simple geometries and low Reynolds numbers in the aim of supplying significant insight into turbulence basic structure that can not be attained in the laboratory.

*DNS of a nominally zero-pressure-gradient flat-plate boundary layer (P. Moin and X. Wu)*

Most of the nowadays CFD simulations are conducted with the Reynolds Averaging approach. Reynolds Averaged Navier-Stokes (RANS) Simulation is based on the Reynolds decomposition according to which a flow variable is decomposed into mean and fluctuating quantities. When the decomposition is applied to Navier-Stokes equation an extra term known as the *Reynolds Stress Tensor *arises and a modelling methodology is needed to close the equations. The “closure problem” is apparent as higher and higher moments may be achieved, more unknown terms arise and the number of equations never suffices. This is of course an obvious consequence to the fact that taking these higher moments is simply a mathematical endeavor and has no physical addition whats so ever.

As RANS is already a working horse but has shown poor performance due its inherent limitation applied to flows of which strong instabilities and large unsteadiness occurs and it does not seem that a breakthrough in achieving a universal modeling methodology is expected soon (or at all…), researchers have shifted much of the attention and effort to Large Eddy Simulation (LES) and hybrid formulations incorporating RANS and LES in certain ways.

In LES the large energetic scales are resolved while the effect of the small unresolved scales is modeled using a subgrid-scale (SGS) model and tuned for the generally universal character of these scales. LES has severe limitations in the near wall regions, as the computational effort required to reliably model the innermost portion of the boundary layer (sometimes constituting more than 90% of the mesh) where turbulence length scale becomes very small is far from the resources available to the industry. Anecdotally, best estimates speculate that a full LES simulation for a complete airborne vehicle at a reasonably high Reynolds number will not be possible until approximately 2050. Nonetheless, for highly unsteady, vortex dominating flows of which the physical phenomena is mainly derived by the large eddies, LES might be affordable and prevails.

Jet Engine Noise CFD Simulation Using One Million Core Supercomputer (Stanford university)

The first, simplest and most widespread sub-grid scale model is the *Smagorinsky model*, an eddy viscosity model relating the sub-grid scale stresses to the local flow mean strain through the Boussinesq hypothesis.

*Smagorinsky subgrid-scale eddy-viscosity model*

As much as the model is straightforward it has some inherent deficiencies. Among is the fact that the Smagorinsky constant is always positive and uniform and as a direct consequence so is the eddy viscosity, which is especially problematic for sheared laminar flows, rendering it as inherently unfit for the prediction of laminar to turbulent flow transition. Another somewhat related deficiency is found in the effect of wall proximity and the value of the eddy viscosity in the near wall region, as the model requires the aid of ad-hoc damping functions and by such the eddy viscosity behavior which should be of the order of the third power of the wall normal proximity is far from attained.

**Here comes the W(h)ALE… 🤓**

## Wall-Adapting Local Eddy-Viscosity (WALE) subgrid-scale model

*The Wall-Adapting Local Eddy-**vicosity (WALE)* model, devised by F. Nicoud and F. Ducros is based on the observations of the physical turbulence structures nature and is tuned to alleviate some of the Smagorinsky model deficiencies such as wall proximity behavior of the eddy-viscosity and the laminar to turbulence transition. Moreover its *local* nature allows it to be easily implemented on any kind of computational grid whether structured or unstructured.

An observation concerning the contribution of turbulence structures to the global dissipation led to **a relation between the eddy viscosity and both the strain rate and the rotation** (both related to the velocity gradient tensor), as opposed to the Smagorinsky relation which is between the eddy viscosity and the strain rate only. **By tuning this dependence on strain rate and rotation according to expected turbulence physics, **the Smagorinsky model specified in the above deficiencies are alleviated, the correct behavior of the eddy viscosity is attained and almost no eddy-viscosity contribution is achieved for wall bounded laminar flows (such as Poiseuille).

*WALE subgrid-scale eddy-viscosity model*

The approach for devising the model makes it much more attractive to implement than dynamic LES (Germano) which requires additional care to be taken to the requirement of filtering at various scales. Moreover, and perhaps more important, most dynamic LES formulation involve non-local terms, a fact that renders them impractical for industrial CFD solvers. *Locality* is a very important feature for modern industrial application oriented CFD codes as they do not provide the infrastructure of computing parameters such as integral boundary layer parameters, or allow integration of quantities along the direction of streamlines. Moreover, as industrial CFD simulations often require to be carried out on parallel computer invoking domain decomposition methodologies, flow features such as boundary layers may be split and computed on separate processors such that search or integration algorithms.

## The incorporation of WALE in hybrid RANS-LES DES formulation

DES original formulation (termed DES97) could be mapped to a Smagorinsky model form in LES mode. As mentioned in the former paragraphs the Smagorinsky model has some shortcomings, one of which is the model’s inherent inability to correctly model laminar to turbulent transition. With reference to DES this shortcoming contributes to the problem of RANS to LES transition (RLT).

The main problem lies in the fact that turbulence in the RLT zone is mainly two-dimensional and dominated by the Kelvin Helmholtz instability.

*Kelvin-Helmholtz instability*

A proposition had been made (C. Mockett et al. 2015) to introduce a modification of the grid scale measure Δ based on the vorticity vector and reformulation of Delayed DES (DDES – DES formulation with a DES-limiter “shielding” to avoid switching from RANS to LES mode on ambiguous grid stencil) in WALE form, avoiding the Smagorinsky’s associated shortcomings while still incorporating a local formulation applicable for industrial CFD solvers. Another reason for the choosing of WALE is to keep the non-zonal approach of DDES.

L(DDES) = L(RANS) – fd MAX(0, L(RANS)-L(LES)

Where fd is almost zero inside the boundary-layer and blends rapidly to one at its edge and in shear-layers where we would like L(DDES) to be the same as L(LES).

The end result proves especially beneficial to the RLT problem and a significant improvement to the standard DDES in handling RLT.

**Back to “All About CFD…” Index**

**Back to “All About CFD…” Index**

Pingback: Going Dynamic I – CFD ISRAEL – Tomer's blog

Pingback: Lets LES – CFD ISRAEL – Tomer's blog

Pingback: Detached Eddy Simulation – an attractive methodology to RANS in the aid of LES – CFD ISRAEL – Tomer's blog

Pingback: Back To The Future – Scale Resolving Simulation – CFD ISRAEL – Tomer's blog

Pingback: Engineering a Scale-Resolving Simulations (SRS) Route – CFD ISRAEL – TAZ Engineering Blog

Pingback: LET’s LES II – CFD ISRAEL – TAZ Engineering Blog

Pingback: Back To The Future – Scale Resolving Simulation in Engineering Desin – Large Eddy Simulations (LES) – Part 3 – CFD ISRAEL – TAZ Engineering Blog

Pingback: Back to the Future – Democratisation of CFD in Future CFD and Concluding Remarks Part 8 – CFD ISRAEL – TAZ Engineering Blog

Pingback: Prediction of CFD in 2030 – CFD ISRAEL – TENZOR blog – Autohrized Channel Partner – ANSYS

Nice article. I would like to point out that XFlow Lattice Boltzmann CFD (Dassault Systemes) has an implementation of WMLES, which is relatively practical for industrial simulations.

Pingback: Going Hybrid – TENZOR (ANSYS Channel Partner) Blog – Mechanical Analysis to the Level of ART